HB-YD488A(Q)耐磨药芯焊丝

HB-YD488A(Q)耐磨药芯焊丝HB-YD114(Q受强烈冲击后 After high impact) 高锰钢堆焊焊丝，受强烈冲击后，表面具有加工硬度的特点。 High-manganese steelhardfacing flux-cored wires, and applied to repair surface of high impact wear parts, cladding layer is impacted with work hardening. HB-YD115(Q受强烈冲击后After high impact) 用于受严重冲击高锰钢堆焊，加工硬化效果显著。 Applied to repair surface of high impact wear parts, cladding layer is impacted with work hardening. HB-YD165(Q高硬度耐磨焊丝，适用于磨粒磨损表面堆焊 High hardness wear-resistant wire, it is used to abrasive wearsurfacing welding. HB-YD172(Q) 1.6 ≥40 用于堆焊齿轮、挖泥斗、矿山机械等磨损件 Applied to repair surface of high impact wear parts, such as gear aud bucket and mining machinery. HB-YD207(Q) 1.6 ≥50 用于堆焊推土机刀片，螺旋桨等磨损零件 Applied to repair surface of high wear parts, such as bulldozer blade and propeller. HB-YD212(Qge;50 用于堆焊各种受磨损的机件表面，如齿轮、挖斗、矿山机械 Applied to repair surface of wear parts, such as gear mud bucket and mining machinery. HB-YD256(Q) 1.6 HB≥170 高锰钢堆焊，适用于破碎机等受冲击磨损部位的堆焊 High-manganese steelhardfacing flux-cored Wires,it is applied to repair surface of high impact wear parts, such as Crusher. HB-YD258(Q用于耐磨表面堆焊 Applied to repair surface of wear parts. HB-YD265(Q高硬度耐磨焊丝，适用于磨粒磨损表面堆焊 High hardness wear-resistant wire, it is used to abrasive wearsurfacing welding. HB-YD322(Q) 1.6 ≥55 用于堆焊各种冲模及切削刃具，兼用于修复要求耐磨损性能较高之机械零件 Applied to repair surface ofhigh wear resistanceparts, such as die and cuttingcutlery. HB-YD327A(Q) 1.6 ≥55 专门用于模具堆焊，耐磨性能高于D322 Used tomouldsurfacing, wear resistance is better than D322. HB-YD337(Q) 1.6 ≥48 用于铸钢或锻钢上堆焊锻模 Applied to repairforging dieatcast steelorforging steel. HB-YD397(Q) 1.6 ≥40 用于堆焊铸钢或锻钢做坯体的热锻模或堆焊高强度耐磨件 Applied to repair hotforging dieatcast steelor forging steel, or highstrengthwear surfacing. HB-YD405A(Q用于热轧辊开坯辊堆焊 Applied to repair hot-rolling blooming rollor. HB-YD430A(Q打底层堆焊焊丝 A backing hardfacing flux-cored Wires HB-YD488A(Q用于轧辊堆焊 Applied to repair rollor HB-YD507Mo(Q用于510℃以下中高压阀门堆焊 Applied to valve which operating tdivperature is less than 510℃. HB-YD518(Q用于连铸辊堆焊 Applied to repaircontinuous caster roller HB-YD688(Q用于磨煤辊打底焊(韧性好，可以多层堆焊) Used to coal roller backing welding.