福州闽清县晋安区壳牌齿轮油批伐一级批伐处

应用 ·钢铁行业的齿轮传动系统。 ·需要“全极压”性能的工业齿轮传动装置。 ·循环和飞溅润滑系统。 ·壳牌可耐压润滑油不能用于汽车的准双曲线齿轮，在此场合应选用壳牌施倍力车用齿轮油系列。 性能特 ·即使在极不利的负载条件下（如长时间和峰值负荷），由于含有均衡的极压及抗磨损添加剂，这种产品也能有效防止钢和铜零件表面的磨损，有效保护齿轮和轴承。 ·具有杰出的热稳定性能和抗氧化性能，抵御油泥和其它有害氧化物的生成，即使在某些时候，，整体油温高达100℃的情况下，也能延长用油寿命。 ·油的分水性强，机器静止下来后渗入油箱内的水可得以迅速分离。（水通常会加速齿轮的轴承的表面疲劳并促使内表面锈蚀）。 ·具有良好的抗腐蚀性能。尤其对于离海近的环境，可有效防止潮气和盐水的腐蚀。 ·抗泡性强，不会形成泡沫。 ·无铅，使用更加安全。Pear drive system of iron and steel industry recommended by shell gear oil batch in JiNan district, minqing County, Fuzhou. Industrial gear transmission that requires "full pressure" performance. :: Cycle and splash lubrication systems. Shell pressure-resistant lubricants can not be used for the quasi-hyperbolic Gears of automobiles. In this case, Shell's gear oil series should be used. Even under extremely unfavorable load conditions(such as long and peak loads), this product can effectively prevent wear on the surface of steel and copper parts and effectively protect gears and bearings because it contains equilibrium extreme pressure and anti-wear additives.. :: Excellent thermal stability and antioxidant properties, resistant to the formation of oil sludge and other harmful oxides, and even in some cases, the overall oil temperature up to 100 °C can extend the life of the oil. :: Oil has a strong watershed, and the water that infiltrates the fuel tank can be quickly separated after the machine is stationary. (Water usually accelerates the surface fatigue of the bearing of the gear and causes the inner surface to rust). Good corrosion resistance. Especially for the environment near the sea, it can effectively prevent the corrosion of moisture and salt water. :: Strong bubble resistance and no foam formation. :: Lead free and safer to use.