贵州六盘水20吨塑料储罐PE储罐

Sichuan Chengdu 20 cubic anti-corrosion tank manufacturers PE storage tanks

20立方防腐储罐，耐腐蚀，防紫外线，可用于盛装各类化学物质，对非氧化性酸，如盐酸、稀硫酸、氢氟酸、稀硝酸、碱和盐溶液都有良好的耐蚀性，但不耐浓硝酸、浓硫酸和其它强氧化剂腐蚀。对有机溶剂常温下一般耐蚀性良好，20立方防腐储罐又称PE储罐，盐酸储罐或是塑料储罐，它是由进口的优质LLDPE原料加工，该原料具有较高的软化温度和熔融温度，有强度大、韧性好、刚性大、耐热、耐寒性好等优点，还具有良好的耐环境应力开裂性，耐冲击强度、耐撕裂强度等性能，并可耐酸、碱、有机溶剂等而广泛用于工业、农业、医药、卫生和日常生活用品等领域。使用成熟的旋转成型技术，一次成型无接缝，不渗漏，区别于传统的焊接板材pp桶具有更好的特性，且桶体坚固耐腐蚀，耐撞击，用于良好的抗紫外线不易老化的特性，可放于室外。放于室外建议选用黑色或蓝色。

20 cubic meters of anti-corrosion tank, corrosion resistance, anti ultraviolet radiation, which can be used for containing various chemical substances, non oxidizing acid, such as hydrochloric acid, sulfuric acid, hydrofluoric acid, nitric acid, alkali and salt solution have good corrosion resistance, but not resistant to concentrated nitric acid, sulfuric acid and other strong oxidant corrosion. The organic solvent at room temperature under general good corrosion resistance, anti-corrosion tank 20 cubic and PE tanks, hydrochloric acid storage tank or plastic tank, which is made of high-quality LLDPE raw materials imported, the raw material with high softening temperature and melting temperature, has the advantages of high strength, good toughness, rigidity, heat resistance, cold resistance etc. also, with good environmental stress cracking resistance, impact strength, resistant to wear and tear strength properties, and acid and alkali, organic solvents and widely used in the fields of industry, agriculture, medicine, health and daily necessities, etc.. The use of rotational molding technology is mature, forming a seamless, no leakage, different from the traditional PP welding barrel plate has better characteristics, and the barrel body strong corrosion resistance, impact resistance, not easy for good anti UV aging properties, can be put on the outside. Recommended for use in black or blue.

这是我们正在安装的PE储罐。

This is the PE tank we are installing.

我公司防腐储罐获得国家质量认证中心（CQC）颁发的《质量管理体系认证证书》，建立的质量管理体系符合标准ISO9001:2008 GB/T，具备出口资质，梯级加强筋缠绕设计，使得桶身更加坚固，防腐性能更佳，如若不够，还可以在外围加做保护套，以保护罐体不受外部损伤的伤害。由于10吨塑料防腐储罐罐体高度比较高，通常都会安装爬梯，护强套和爬梯可以您自己安装，也可以我们代为加工，储罐质量轻您放心，我们承诺，

Anti-corrosion tank our company obtained the National Quality Certification Center (CQC) issued the "quality management system certificate", the establishment of quality management system conforms to the ISO9001:2008 standard of GB/T, export qualifications, cascade reinforcement design of winding, the barrel body is more solid, better corrosion resistance, if not enough, can also do a protective sleeve in the periphery. In order to protect the body from external injury. Due to the 10 tons of plastic anti-corrosion tank height is relatively high, usually will be installed ladder, protective sleeve and ladder can be installed on your own, we can also process, the quality of light storage tank you rest assured that we promise,

储罐1年以内自然损坏，我们会提供免费维修服务。每一个储罐在出库时我们都会尽心检查，

We will provide free maintenance service for 1 years. Every tank in the warehouse we will be careful inspection,

无任何破损，如到货时出现破损，请先不要安排卸货，并及时与我们联系解决。

No damage, such as the arrival of the damaged, please do not arrange unloading, and contact us in time to resolve.

在运输过程中出现的罐体刮擦，影响罐体美观但不影响使用的，属于正常现象，因为体积较大，运输过程中难免发生摩擦，还请见谅

In the course of transport tank scraping, the impact of the beautiful but does not affect the use of tanks, is a normal phenomenon, because of the larger volume, the inevitable friction in the transport process, please forgive me

我公司产品质量cqc证书

CQC certificate of product quality

员工正在安装顾客的要求安装爬梯和加强套

The employee is installing the customer's request to install the ladder and the reinforcing sleeve

我们公司先与多家公司合作产品质量得到认可，我们周边的厂家也在使用我们的储罐，所以请您放心质量。

Our company with a number of companies to cooperate with the quality of products are recognized, we are also around the manufacturers use our tanks, so please rest assured that the quality of.

如有任何问题都可在QQ或是上联系我询问，QQ ht

If you have any questions you can contact me on QQ or WeChat, QQ WeChat ht